Fortune Bay (NL, Canada) oceanographic observations May 2015 - May 2017
A comprehensive set of oceanographic data were collected in Fortune Bay, a broad, mid-latitude fjord located on the south coast of Newfoundland (Canada). The dataset was gathered in partnership with IFREMER who collected data around the adjacent French archipelago of Saint-Pierre and Miquelon. The dataset consists of data from taut-line moorings, land-based stations (a tide gauge and a couple of weather stations) and CTD profiles performed during mooring maintenances (~every 6 months). Parameters covered by the moorings include water column temperature (thermistor chain), salinity (2 points/depths per mooring), dissolved oxygen (on a limited number of moorings, within the surface layer) as well as current profiles (ADCP). Land-based stations monitored water level and temperature (tide gauge) and wind speed and direction, atmospheric pressure, air temperature and solar radiation (weather station). CTD profiles include dissolved oxygen for the most part. The program lasted two full years from May 2015 to May 2017 and sampling interval varied from 1-60 min depending on the instrument.
Important Note: This submission has been initially submitted to SEA
scieNtific Open data Edition (SEANOE) publication service and received the recorded DOI.
The metadata elements have been further processed (refined) in EMODnet
Ingestion Service in order to conform with the Data Submission Service
specifications.
Identificatie
Versiedatum | 2020-02-10 |
---|---|
Type versiedatum | Creatie: Aanmaakdatum of opnamedatum van de dataset. |
Versiedatum | 2020-06-08 |
Type versiedatum | Wijziging: Datum van wijziging, controle, verbetering van dataset. |
Versiedatum | 2020-12-14 |
Type versiedatum | Publicatie: Uitgavedatum van de dataset. |
Type versiedatum | Publicatie: Uitgavedatum van de dataset. |
Dataset identificator | a53ad03f-3632-6323-3233-000000062314 |
Dataset identificator |
Inhoud
Contactgegevens dataset(serie)
Organisatie | SEA scieNtific Open data Edition |
---|---|
Adres | By address: IFREMER / IDM / SISMER - Scientific Information Systems for the SEA, IFREMER Centre de Bretagne, ZI Pointe du diable CS 10070 |
Plaats | PLOUZANE |
Postcode | 29280 |
Land | France |
data@seanoe.org | |
Connectiepunt URL | https://www.seanoe.org/ |
Rol | Publisher: Publisher |
Contactgegevens dataset(serie)
Organisatie | Ifremer, Scientific Information Systems for the sea |
---|---|
Adres | IFREMER Centre de Bretagne ZI Pointe du diable CS 10070 |
Plaats | PLOUZANE |
Postcode | 29280 |
Land | France |
sismer@ifremer.fr | |
Connectiepunt URL | http://data.ifremer.fr/SISMER |
Rol | Dataset Holding Organisation: Dataset Holding Organisation |
Contactgegevens dataset(serie)
Organisatie | Ifremer, Scientific Information Systems for the sea |
---|---|
Adres | IFREMER Centre de Bretagne ZI Pointe du diable CS 10070 |
Plaats | PLOUZANE |
Postcode | 29280 |
Land | France |
sismer@ifremer.fr | |
Connectiepunt URL | http://data.ifremer.fr/SISMER |
Rol | Auteur: Partij die auteur is van de data. |
Trefwoorden
GEMET - INSPIRE themes, version 1.0 | Oceanographic geographical features |
---|---|
SeaVoX salt and fresh water body gazetteer |
North Atlantic Ocean
|
SeaDataNet Agreed Parameter Groups |
Dissolved gases
|
SeaDataNet device categories |
current profilers
|
SeaVoX Device Catalogue |
Sea-Bird SBE 25 Sealogger CTD
|
SeaDataNet Parameter Discovery Vocabulary |
Sea level
|
SeaVoX Platform Categories |
land/onshore structure
|
MEDIN data format categories |
Delimited
|
BODC-approved data storage units (Vertical Unit) | Metres |
Karakterset | UTF-8: 8-bit variabele grootte universele karakterset, gebaseerd op ISO/IEC 10646 |
---|---|
Categorie(ën) |
Begrenzing
Omschrijving geografische begrenzing | |
---|---|
Identificator geografische begrenzing |
Begrenzing
Omschrijving geografische begrenzing | |||||||||
---|---|---|---|---|---|---|---|---|---|
Omschrijvende rechthoek
|
|||||||||
Identificator geografische begrenzing |
Referentiesysteem
Horizontaal en/of verticaal referentiesysteem
Naam | WGS 1984 |
---|
Kwaliteit
Niveau kwaliteitsinformatie | Dataset: Informatie heeft betrekking op de dataset. |
---|
Bewerkingen
Algemene beschrijving herkomst | Processed data|To provide some added value, the ADCP backscatter datawere processed to convert the raw returned signal strengthindicator (RSSI,Ein equation below), a measure of acousticpressure received by the transducers, to a corrected backscat-ter volume Sv, proportional to the amount (i.e. volume) ofparticles present in the water column. The method used to dothe correction is an updated version of the popular Deinesmethod (Deines, 1999) published by Mullison (2017). Transducer temperature measured at trans-ducer head and the salinity value selected during instrumentsetup (ES command; 32 in our deployments) were used tocalculate the water absorption (a) along the range (fromtransducer)R, thereby implying homogeneous water condi-tions. The transmit pulse lengthLDBMwas calculated usingbin size (1–3 m) and beam angle (20?) values. Default valuesof constantCand transmit powerPDBWprovided by Mulli-son (2017) were used |
---|
Conformiteit
Domeinconsistentie
Resultaat
|
Domeinconsistentie
Resultaat
|
Domeinconsistentie
Resultaat
|
Toegangs- en gebruiksbeperkingen
Legale en veiligheidsbeperkingen
Beperkingen van de dataset(serie)
|
|||||||||||
Beperkingen van de dataset(serie)
|
Distributie
Overdracht
|
Meta-metadata
Metadata identificator (fileIdentifier) | a53ad03f-3632-6323-3233-000000062314 | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Taal metadatarecord | Engels | ||||||||||||||||
Karakterset metadatarecord | UTF-8: 8-bit variabele grootte universele karakterset, gebaseerd op ISO/IEC 10646 | ||||||||||||||||
Hiërarchisch niveau | Dataset: Informatie heeft betrekking op de dataset. | ||||||||||||||||
Metadata wijzigingsdatum | 2024-11-19T00:00:00 | ||||||||||||||||
Naam metadatastandaard | ISO 19115:2003/19139 | ||||||||||||||||
Versie metadatastandaard | 1.0 | ||||||||||||||||
Metadata-auteur
|