This data set contains underway Temperature, Conductivity, Salinity and Potential Density anomaly data collected by a Thermosalinograph (TSG) during the MedSHIP cruise TAlPro2022 (on the Belgia vessel RV BELGICA) in the Western Mediterranean Sea in May 2022. Underway data was collected along the cruise track with an autonomous TSG system, consisting of a SBE21 together with a SBE38 Thermometer. Both systems worked independent from each other throughout the cruise. While temperature is taken at the water inlet (SBE38), salinity and density are calculated within the interior TSG from conductivity and interior temperature (SBE21)

Data collected during the BENCHMARK cruise. The cruise was carried out between August 1-10, 2021 on Denmark Strait, in Icelandic and Greenlandic waters. The objectives of the cruise were to characterise the composition and distribution of epibenthic fauna in the Denmark Strait, with a particular focus on taxa considered indicators of Vulnerable Marine Ecosystem, and to survey water mass properties and flow structure in the area.

This dataset is a compilation of en-route thermo-salinometry data recorded by the RV A962 Belgica. Data are grouped per campaign from 1993 until 2021. Data are measured by a Sea-Bird thermo-salinometry sensor installed in the vessel Scientific Seawater circuit (constant depth).

Physical data associated with the ABRACO2 cruise. The ABRACOS2 cruise's main objective was to draw up a 3D characterisation of the abiotic and biotic compartments and their interactions. The cruise had 3 specific objectives: 1) Characterisation of water masses and their dynamics. Data collected (ADCP, CTD, rosette, etc.) will be used to study the physical connections between (i) ocean islands and coastal ecosystems and (ii) tropical/subtropical coastal regions to the South and equatorial coastal regions to the North. In-situ measurements will also make it possible to validate the regional high-resolution hydrodynamic models. 2) Ecosystem acoustics. Collecting multifrequency acoustic data in order to create the first 3D characterisation of island and coastal ecosystems in the Northeast Region of Brazil. Acoustic observations will be combined with sampling with pelagic trawl (Legs 1 and 2), bottom trawl (Leg 1), and with sampling of zooplankton and video images. 3) Biodiversity and food web structure. In-situ sampling will provide information about the distribution, biodiversity, trophic ecology (use of stable isotopes) and the contamination (methylmercury) of organisms. The related projects are ABRAÇOS and 'Planning in a liquid world: Marine spatial planning and network dynamics' (PADDLE), (H2020 RISE), (PI: M. Bonnin, 2017-2020). Important Note: This submission has been initially submitted to SEA scieNtific Open data Edition (SEANOE) publication service and received the recorded DOI. The metadata elements have been further processed (refined) in EMODnet Ingestion Service in order to conform with the Data Submission Service specifications.

Physical data associated with the ABRACO cruise. The ABRACOS (Acoustics along the BRAzilian COaSt) cruise aims to begin an integrated approach to monitoring the tropical marine ecosystems in the Brazilian Nordeste region in order to better understand the connectivity between the sub-systems composing it. In particular, this cruise should fill this gap and improve understanding of the degree of connectivity which exists between the oceanic islands and the continental margin in the Nordeste of Brazil, as well as within the continental platform. In this context, the main objective of the ABRACOS cruise consisted in drawing up a 3D characterization of abiotic and biotic compartments and their interactions in the Brazilian Nordeste. Specific objectives: Objective 1 - Characterization of island and coastal dynamics. Measurement of hydrological characteristics and currents (rosette, CTD, ADCP) should enable the circulation and characteristics of water masses to be described. These data will be more specifically used to study the physical connections between 1) the oceanic islands and coastal ecosystems and 2) the coast along the ocean and coastal zones. The in-situ measurements obtained will also be used to validate high resolution regional hydrodynamic models (e.g. ROMS model) which will be implemented. In-situ data acquired during the ABRACOS cruise will be supplemented by satellite data for sea surface heights (e.g. AVISO), surface temperature and chlorophyll (e.g. MODIS) and wind (e.g. ASCAT). However, it should be noted that the resolution of the products usually used and land-ocean interferences on altimetry and backscatter data will not allow these products to be used at less than 30-50 km from the coast. We will be able to partially eliminate this problem by using new "alongtrack" processing of altimetric data performed by the Center for Topographic studies of the Ocean and Hydrosphere in Toulouse. These data will be used to document the geostrophic (from sea level) ageostrophic (from wind) components of surface circulation and their variability in coastal zones. Objective 2 - Ecosystem acoustics. Acoustic tools can provide the simultaneous acquisition of quantitative and qualitative data, at different spatial-temporal scales, in numerous biotic and abiotic compartments of an ecosystem. These data can be used to characterize the ecosystem in three dimensions and directly study interactions between compartments. Active acoustics have rarely been used in tropical coastal zones. The multifrequency (38, 70, 120, and 200 kHz) acoustic data acquired during the ABRACOS cruise will be used to create an initial 3D characterization of island and coastal ecosystems in the Brazilian Nordeste region, simultaneously characterizing the seabed and water column, when possible. The French team proposing this has sound experience in the field and developed the open source 'Echopen' software in Brest (www.france-nord.ird.fr/lesressources/outils-informatiques) which can separate the various sources of acoustic echoes (e.g. zooplankton, gelatinous organisms and fish) from multifrequency acoustic data. In order to calibrate the 'Echopen Brésil' version, acoustic observations from the ABRACOS cruise must be combined with sampling using micronekton, mesopelagic and bottom trawls (Leg 2 only) and sampling of zooplankton at fixed stations (bongo and WP2 plankton nets and phytoplankton nets). To validate the 'Echopen substrat' tool we will use sampling done with bottom trawl, substrate grab and video camera observations. Objective 3 - Biodiversity and trophic structure. As indicated, acoustic observations will be complemented by in-situ sampling of planktonic, pelagic (mid-water trawls) and demersal-benthic (bottom trawl) organisms. This will involve establishing how hydrological conditions determine the vertical distribution of organisms and therefore interactions. One part of the sampled organisms will be conserved in formaldehyde then identified by taxonomists at the Federal university of Rio de Janeiro (UFRJ) to be added to Brazilian collections. The remainder of the samples will be used to obtain biological information. Along with the classic biological measurements (size, weight, sex, maturity, etc.) specimens of entire organisms (plankton) and soft tissues (muscles) will be taken in order to titrate various trophic tracers: stable isotopes of carbon, nitrogen and insofar as possible mercury. In addition, particulate organic matter (POM) will be collected by filtration (samples taken by rosette) to titrate the amounts of stable isotopes. Spatial variations in these tracers will make it possible to highlight the relative positions of these organisms in the food web and variations in food sources through the local POM signatures. Measurements of methylmercury (MeHg), a neurotoxin which accumulates in the food chain, will also be performed on part of the samples used for stable isotopes. The related projects are ABRACOS and Action Incitative IRD "DANOB". Important Note: This submission has been initially submitted to SEA scieNtific Open data Edition (SEANOE) publication service and received the recorded DOI. The metadata elements have been further processed (refined) in EMODnet Ingestion Service in order to conform with the Data Submission Service specifications.

IPMA’s research vessel “NORUEGA” is equipped with a termosalinograph (SBE21) working as a pocket ferry box collecting data every time the ship leaves on a mission. The SBE21 records Temperature and Conductivity every 5 seconds at 3m depth. This dataset contains values of Temperature and Salinity with a time average of 1 minute with quality control flags assigned.

Two quality controlled datasets here archived were collected during the oceanographic cruise BioArgoMed that held in Spring 2015 over the whole Mediterranean Sea, onboard R/V Tethys 2. The first datset is composed of continuous time series of sea surface temperature (TEMP in °C), sea surface salinity (practical scale, PSAL) and fluorescence of chlorophyll-a (FCHL in mg/m3) along the ship track, with a resolution of 5 minutes. The second dataset is composed of continuous time series of ocean currents profiles along the ship track with a resolution 1 km. The profiles are binned at 8m resolution from 18m until 570m. The quality controlled parameters are the depth (in m), the zonal current (UVEL in m/s) and the meridional current (VVEL in m/s).